Five new practice exams and tutorials have been posted over on the website - be sure to read today and yesterday's blog postings for links!
Let's get to today's questions! All of today's questions are short answer.
CCNA Certification And CCENT Certification:
What keystroke will get you out of the following configuration mode? Will your changes be saved by this keystroke?
Would you like to enter basic management setup? [yes/no]:y
Configuring global parameters:
Enter host name [Switch]: Switch1
The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration.
Enter enable secret:
Two popular signature actions in SDM are denyAttackerInline and denyFlowInline. There's a subtle difference between the two. What is it?
What is a "lily pad network"?
You've configured RTP Header Compression (cRTP). To what degree will the 40-byte IP/RTP/UDP headers be compressed if UDP checksums are in use?
CCNP Certification / BSCI Exam:
What is the default seed metric of an EIGRP route that is redistributed into an OSPF process?
CCNP Certification / BCMSN Exam:
What global command resulted in the following output?
%Warning: this command enables portfast by default on all interfaces. You should now disable portfast explicitly on switched ports leading to hubs, switches and bridges as they may create temporary bridging loops.
AutoQoS Discovery enabled for applications
Discovery up time: 4 minutes, 29 seconds
AutoQoS Class information: Class Voice:
Recommended Minimum Bandwidth: 43 Kbps/5% (PeakRate)
Answers right here on Sunday, August 31!
I've got over 200 more free practice exams, fully-illustrated tutorials, and more on my Cisco CCNA, CCNP, and CCENT tutorials page - head over there and take a look!
To your success,