Here are your free Cisco CCNA and CCNP questions for Monday, June 3!

I've got a new set of CCNA certification exam questions for you over on the main site as well - 10 questions on Frame Relay to help you prepare for your CCNA and CCENT exams. You CCNP candidates should take a look, too!

CCNA Exam:

The full command to configure OSPF Area 23 in the below configuration as a total stub area is ____________ .

R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#router ospf 1
R3(config-router)#


CCNP Certification / BSCI Exam:

The cost of an OSPF E1 route indicates what?

A. The cost of the path from the local router to the ASBR.

B. The cost of the path from the local router to the destination network.

C. The cost of the path from the ASBR to the destination network.

D. The cost of the path from the local router to the ABR.


CCNP Certification / BCMSN Exam:

Short answer: What interface-level command configures a multilayer switch port as a routed port?


CCNP Certification / ISCW Exam:

Installing an unauthorized packet sniffer on a network falls into what category of network attack?

A. access

B. DoS

C. CoS

D. reconnaissance

E. middle


CCNP Certification / ONT Exam:

Short answer: Name the three types of traffic marking performed by Frame Relay, and briefly describe each.

Answers will be posted on Tuesday, June 3. Be sure to visit the website and solve those free CCNA Frame Relay questions!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/