Here are your Cisco certification exam training questions for Wednesday, June 4!


CCENT Certification:

What is the range of Class B RFC 1918 addresses?


CCNA Certification:

Identify the true statements regarding the address range reserved for loopbacks.

A. It's acceptable to configure an address from this range on a PC.

B. It's not acceptable to configure an address from this range on a PC.

C. It's acceptable to configure an address from this range on a Cisco loopback interface.

D. It's not acceptable to configure an address from this range on a Cisco loopback interface.



CCNP Certification / BSCI Exam:

ISIS assigns redistributed routes a metric of ____________.



CCNP Certification / BCMSN Exam:

In a dot1q tunneling scheme, what switches must be configured with the "switchport mode dot1q tunnel" command?

A. The customer network edge switches.

B. All switches in the service provider network.

C. The service provider edge switches.

D. Both the customer network edge and service provider edge switches.



CCNP Certification / ISCW Exam:

Which of the following Cisco router services are enabled by default?

A. CDP (globally)

B. FTP Server

C. TFTP Server

D. Network Time Protocol (NTP)

E. TCP small servers

F. UDP small servers



CCNP Certification / ONT Exam:

Which of the following are actions that can be taken by class-based traffic policing?

A. Drop

B. Violate

C. Exceed

D. Set

E. Transmit

F. Conform


Answers will be posted on Thursday, June 5!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/

Comments

Richard Morales said…
What is the range of Class B RFC 1918 addresses?

According to RFC 1918 the range is

Class Private Network
A 10.0.0.0 - 10.0.0.0
B 172.16.0.0 - 172.31.0.0
C 192.168.0.0 192.168.255.0
Richard Morales said…
The range of Class B according to RFC 1918 is 172.16.0.0 - 172.31.0.0

Popular posts from this blog