Wednesday, April 23, 2008

Welcome back! It's Wednesday, April 23, and here are the answers to yesterday's Cisco certification exam practice questions!

CCENT Certification:

What command resulted in the following output?

R1#

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.12.123.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 68/68/72 ms


Answer: ping 172.12.123.2



CCNA Certification:

In OSPF, what is meant by the term "external route"?

Answer: An OSPF external route is one learned by the OSPF domain via redistribution. The default code for an OSPF external route is "O E2".


CCNP Certification / BSCI Exam:

By default, how many EIGRP hellos have to be missed for an adjacency to be declared down?

Answer: Three.


CCNP Certification / BCMSN Exam:

For what purpose is VMPS used?

Answer: The VLAN Membership Policy Server is used to assign users to VLANs dynamically.


CCNP Certification / ISCW Exam:

You've just completed a CBWFQ configuration - almost. You want to apply the policy map CCNP to traffic leaving interface serial0. What command on S0 will do this?

Answer: We need to use the service output command, followed by the policy map name. "service output CCNP" is the correct answer.


New questions posted later today!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/

No comments:

Blog Archive