Sunday, April 20, 2008

Here are the answers to this past Friday's Cisco exam training questions!


CCENT Certification:

You've just run the show interface ethernet0 command and you see the interface is "administratively down". What causes that?

Answer: The interface is shut down. Just run no shutdown on the interface to open it.



CCNA Certification:

What's the broadcast address for a frame?

Answer: The all-Fs MAC address, ff-ff-ff-ff-ff-ff (or FF-FF-FF-FF-FF-FF, as there's no difference between upper and lower case in hexadecimal numbering.)



CCNP Certification / BSCI Exam:

What port number does BGP use to create and maintain adjacencies?

Answer: TCP port 179. Don't block that one with an ACL! :)



CCNP Certification / BCMSN Exam:

What's the maximum number of physical channels that can be placed into an Etherchannel?

Answer: Eight.


CCNP Certification / ONT Exam:

What's the full command for doubling the capacity of the default queue when Priority Queuing is in use?

Answer: Assuming we're using list 1:

priority-list 1 queue-limit 20 40 120 80.

From left to right, we're defining the limit for the high, medium, normal, and low-priority queues. The default queue is the normal-priority queue, and the default capacity for that queue is 60 packets. Even though we're only changing one value, the IOS will make us list a value for all four queues.


New questions posted later today, along with a new CCNP ISCW exam tutorial!


To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/

No comments:

Blog Archive