Here are the answers to the free Cisco training questions posted here on Wednesday, April 16!



CCENT and CCNA Certification:

You've just configured a password for users that will use Telnet to connect to your router. A few questions...

1. In the running configurations, where will the passwords appear?

2. At which layer of the OSI model does Telnet run?

3. Is the password encrypted by default?

4. If not, how can you perform that encryption?

Answers:

1. Under the VTY lines, where you configured them.

2. Telnet runs at Layer 7 of the OSI model, the Application layer.

3. The VTY password is not encrypted by default.

4. You can encrypt that password and the other unencrypted passwords in the config with the global service password-encryption command.



CCNA Certification AND CCNP Certification / BSCI Exam Question:

You have summarized the routes below. What is the resulting summary?

100.1.1.0 /16
100.2.1.0 /16
100.3.1.0 /16
100.4.1.0 /16
100.5.1.0 /16
100.6.1.0 /16
100.7.1.0 /16

Answer: 100.0.0.0 /13 (or 255.248.0.0 in dotted decimal).



CCNP Certification / BCMSN Exam:

When dynamic VLANs are in use, what value decides a switch port's VLAN membership?

Answer: The MAC address of the host connected to that port.


CCNP Certification / ISCW Exam:

What protocol number does AH use?

Answer: IP protocol 51.


CCNP Certification / ONT Exam:

"campus backbone", "management", and "server farm" are three portions of the Enterprise Campus part of the Enterprise Composite Network Model. Name the other three.

Answer: The other portions are Building Distribution, Building Access, and Edge Distribution.


New questions posted later today!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/

Comments

Popular posts from this blog