Monday, February 26, 2007

Thought For The Day:

Do not wait to strike till the iron is hot; but make it hot by striking .-- William B. Sprague

Here are Monday's CCNA and CCNP questions!


R1 and R3 are connected via a DTE/DCE cable, both routers using interface serial1. What additional command is needed to make the line protocol come up?

A. On the DTE, configure clockrate 56000.

B. On the DCE, configure clockrate 56000.

C. On the DTE, configure clockrate 56.

D. On the DCE, configure clockrate 56.


Which of the following OSPF network types are RFC compliant?

A. point-to-point

B. point-to-multipoint broadcast

C. point-to-multipoint non-broadcast

D. broadcast



Short answer: Users are complaining of slow access to network services when they first log in to the network. Some are having problems receiving their dynamically assigned IP addresses. What Cisco switching feature can help?

Answers will be posted Tuesday!

To your certification exam success,

Chris Bryant
CCIE #12933

No comments:

Blog Archive