Here are the answers to Thursday's CCNA and CCNP questions!

CCNA:

Identify the correct statements regarding CHAP.

A. The passwords must be the same on both ends of the connection.

B. The passwords may be different on the two ends of the connection.

C. It's available when HDLC is used.

D. It's available when PPP is used.

E. It requires the use of the "ppp chap sent-username" command.

F. It does not require the use of the "ppp chap sent-username" command.

Answers: A, D, F. CHAP requires the passwords to be the same on both ends of the connection. CHAP is a PPP feature that is not available with HDLC. PAP uses the sent-username command, but not CHAP.


CCNP / BSCI:

An OSPF total stub router can contain what kinds of routes in its routing table?

A. E1 routes and a default route

B. E2 routes and a default route

C. A default route only

D. Intra-area routes and a default route

E. Inter-area routes and a default route

Answer: D. The routing table of a total stub area can contain intra-area routes (O) and a default inter-area route using the ABR as the next hop.


CCNP / BCMSN:

When dynamic VLANs are in use, what value decides a switch port's VLAN membership?

A. The VLAN configured on the port

B. The host's IP address

C. The IP subnet the host is on

D. The host's MAC address

Answer: D. The host's MAC address decides the port's VLAN membership.


Fresh questions served later today!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com