Here are your CCNA, CCNP, and Network+ exam questions for Tuesday. Security+ questions start later this week!

CCNA:

By default, what values are considered by IGRP when computing a path's metric?

A. Bandwidth.

B. Delay.

C. Bandwidth and delay.

D. Neither bandwidth nor delay.


Network+ :

Orthogonal Frequency Division Multiplexing (OFSM) is used by which of the following wireless standards?

A. 802.11a

B. 802.11b

C. 802.11c

D. 802.11g


CCNP / BSCI:

How often are EIGRP hellos sent across a high-speed link?

A. Every 5 seconds.

B. Every 10 seconds.

C. Every 15 seconds.

D. Every 30 seconds.

E. EIGRP assumes an adjacency across a high-speed link to be up after it's built, so hellos are not regularly sent across the line.


CCNP / BCMSN:

You want to connect a router's AUI port to a switch port. What cable type should you use?

A. rollover

B. crossover

C. straight-through

D. DTE/DCE


CCNP / BCRAN:

What command clears dynamic NAT mappings?

A. clear ip nat map *

B. clear ip route *

C. clear ip nat dynamic all

D. clear ip nat trans *


CCNP / CIT:

Examine the following output and identify the true statements.

begin
set password $1$FJEUSIEWGjegEJKGUIEV893
set enablepass $1$FHJEMRJGEKEIGE
set prompt Console>>
set length 100 default


A. The command that was run to show this output was begin config.

B. The command that was run to show this output was show config.

C. This could be a Catalyst 5000 switch.

D. This could be a Catalyst 2950 switch.


See you later today with the answers to yesterday's questions, and a Network+ tutorial you'll find nowhere else!


To your certification exam success,

Chris Bryant
CCIE #12933
www.thebryantadvantage.com